电话 螺丝DC插座 专业生产DC插座 DC-022 DC-022

1.0构造tectonic
a型状、尺寸依照制品图而规定. shape, size in accordance with the provisions of map products.
b外观:各部位应良好无秤锈、裂痕、电镀不良现象.
appearance : the good parts should weigh no rust, cracks, electroplating ill.
2.0 使用环境条件the use of environmental conditions
a环境湿度humidity: -25℃~+70℃
b 相对湿度relative humidity: ≤93% (+40℃)
c 机械性能mechanical properties
d 动作力power moves:3~25n
e 端子强度terminal strength
各端子在各方面承受500克力作用下,在10秒内,无脱落、破损等不良现象,但弯曲也可.
the terminals in all aspects under 500 caledon role, in 10 seconds, without any loss, damage and other negative phenomena, but also bending.
3.0 电气性能electrical performance
a 额定电流current ratings:dc 12v 1a.
b 接触电阻contact resistance:50mω以下.
c 绝缘电阻insulation resistance:
在端子之间各端子与壳之间加ac 500v 条件下,持续1分钟测试.100mω以上. the terminal between the terminal and shell in between 500v ac conditions, sustained a minute test mω above .100.
d 抵抗电压resistance voltage:
在端子之间端子与壳之间加 ac 500v 60hz 条件下,持续1分钟测量.无击穿现象出现. in between the terminal and the terminal shell in between ac 500v 60hz conditions, sustained a minute measurement. no breakdown phenomenon.
4.0可靠性试验reliability test
a 寿命试验life test
以涂有薄层润滑脂的插头(涂润滑脂防止摩擦过热)以每分钟15~20次,无负载插座拨出5,000次，符合规格3.0和4.0规定值. coated with a thin layer of grease plugs (tu grease prevent friction overheated) per minute to 15 ~ 20, a no-load socket allocated 5,000, with the specifications 3.0 and 4.0 provides value
b 温度试验temperature test
将插座放置于40±2℃,相对温度90%~95%环境中,96个小时后取出,取去水滴,将插座放置于常温常湿环境中,于30分钟内测试,符合规格3.0和4.0要求. socket to be placed on the 40 ± 2℃, relative humidity of 90% ~ 95% of the environment, 96 hours after the removal, taking a drop of water, will be placed in the socket temperature often wet environment, in the test within 30 minutes, with 3.0 and 4.0 specifications re
c 耐热试验heat test
将插座放置于70±2℃环境下,96个小时后取出,将插座放置于常温常湿环境中,于30分钟内测定,符合规格3.0和4.0要求. socket to be placed on the 70 ± 2℃ environment, 96 hours after the removal of sockets placed on the temperature and moisture environment, within 30 minutes measured with 3.0 and 4.0 specifications re
d 耐寒试验hardy trial
将插座放置于-40±3℃环境中,96个小时后取出,取去水滴,将插座放置于常温湿环境中.于30分钟内测定,符合规格3.0和4.0要求.
socket to be placed on the 40 ± 3℃ environment, 96 hours after the removal, taking a drop of water, will be placed in the socket regular temperature and humidity environment. within 30 minutes measured with 3.0 and 4.0 specifications re
5.0 耐焊接热试验thermal resistance welding test
a 自动焊;温度 235±5℃,时间5±1秒. automatic welding; temperature of 235 ℃ ± 5, ± a time five seconds.
b 人动焊;温度 350±10℃,时间3±0.5秒. people to welding; the temperature of 350 ± 10 ℃ for 3 ± 0.5 seconds.

本产品的加工定制是是，品牌是DELING，型号是DC-005，额定电流是1A（A），额定电压是12V（V），环境温度是-25℃~+70℃（℃），壳体材质是塑料，导电体材质是五金，产品认证是ROHS，DC插座是1